The Doc had Expedition HQ, on the Gold Coast, fit the Redarc TowPro Kit, the 13 pin Euro plug was replaced by a 12/7 pin flat pin on its own wiring loom, various Anderson plugs were fitted (5 in total). Two for solar input, 2 for fridges and the last for towing, A CTEK 250SE was mated to the 120S and lastly the Clevershade 270 Awning was fitted. A long day and most of the changes are hidden.
The same Clevershade awning fitted to a LC300.
AERIALS FITTED
The aerial on the left of screen is the RFI CD63 Black 6.5dbi removable aerial. It is very thin, so the driver’s vision is barely impacted. The twists you see 1/2 down the whip is there to absorb vibrations/corrugations. When travelling across corrugations The Doc calls it the hula girl.
This aerial is fitted to a GME TX3520S.
The aerial on right of screen is the RFI CD961-71-75. It has interchangeable antenna whips which operate at 6.5dBi and 3dbi. The 3dbi whip is tiny at about 10cm long. The larger 6.5dBi antenna is fitted in the picture. This aerial is fitted to a GME XRS390C. I have a GME XRS-BT1 hands free kit to install on the GMEXRS390.
The handsets are mounted on the passenger’s side of the centre console, using the Brodit bracket.
The basic cable feed is shown in the second image.
You must be logged in to post a comment.