Now a detailed breakdown of the Expedition HQ work.

When the REDARC TowPro was installed yesterday, at Expedition HQ, The Doc had the REDARC controller installed on a Lightforce Switch Fascia. You can see the steering column in the second image.

I will be installing a USB charging port in the LF Fascia powered by the driver’s side power socket.

The Doc may also install a REDARC Boost and EGT Gauge and its dimmer switch can be installed in the LF Fascia as well. A picture of the gauge, not the boring dimmer switch.

The LF Fascia can be used for other purposes, like a UHF pass through, compressor switch, etc. The Doc thought it best to have a fascia for future needs and not mess up the INEOS any more and The Doc has a neat and tidy solution for nay more switches.

The Doc had Expedition HQ, on the Gold Coast, fit the Redarc TowPro Kit, the 13 pin Euro plug was replaced by a 12/7 pin flat pin on its own wiring loom, various Anderson plugs were fitted (5 in total). Two for solar input, 2 for fridges and the last for towing, A CTEK 250SE was mated to the 120S and lastly the Clevershade 270 Awning was fitted. A long day and most of the changes are hidden.

The same Clevershade awning fitted to a LC300.